Fire Retardant (Water Based) 6009W

Description

Seamaster FireGuard (Water-Based) Intumescent Fire Retardant Coating 6009W is a
ideal way to combine an attractive architectural appearance with fire safety. It is water
based, low VOC, no toxic, low odour, special formulation for environmentally friendly,
suitable for enclosed area using, easy application, no sagging, no cracking, good film
thickness build up property. While Seamaster Intumescent Coating 6009W is exposed
to fire will form a highly efficient foam based on micro-porous carbon. The foam may be
up to 100 times thicker than the original coating and has a strong heat insulation effect.

Recommended Use

Seamaster FireGuard (Water-Based) Intumescent Fire Retardant Coating 6009W is
used for protect steel structures like airport terminal building, shopping centers, sport
center, power plant, theatres and office buildings. It also can be used for soft board,
timber and decorative wooden panels, etc.

Surface

Preparation Surfaces to be coated must be free from oil, grease or other materials or conditions
likely to impair adhesion. Must be shot/ grit blasted to minimum of SA 2.5 on the
Swedish Standard. Suitable primer requested according different surface.

Certification

It complies with requirements under:

• Recognised as a Halal product by LPPOM (MUI) Indonesia
• Approval Certificate for Product Category Firestop complying with BS476: Part 21:
1987 (valid period Jun-23 till Jun-25), issued by Malaysia authorities Fire and
Rescue Department (Jabatan Bomba dan Penyelamat Malaysia)